Customization & Modifications

John Boos

John Boos X-0411E Side 2 Additional Table Length Specify Left Or Right Side (per Linear Foot)

Advance Tabco

Advance Tabco TA-36C Hinged Door Trash Flap At Top 30" Maximum Width (per Door)

Advance Tabco

Advance Tabco TA-MSC-2 Rear Riser Panel For 31" Wide Mobile Sinks Includes Paper Towel Dispenser (keyless)

Advance Tabco

Advance Tabco TA-117 Undermount Add On Shelf For Paper Or Accessories 5-1/2” Height Clearance (when Mounted Under A Shelf Clearance Will Be Reduced By Height Of The Front Turn Down)

Advance Tabco

Advance Tabco 7-PS-37C Pedestal Base Only For 16" X 20" Bowl With Splash Mounted Faucets

Advance Tabco

Advance Tabco DTA-64 Pre-Rinse Slide Bar For 16"W X 20"D Fabricated Sink Bowls

Advance Tabco

Advance Tabco SG-PC Powder Coat Stainless Parts Of Food Shield (specify Color) (not Required For Standard Brushed Stainless Appearance) Typically Applies To The Sleek Shield Posts & Usually SG-AN Is Desired As Well For Aluminum Parts Of The Shield (such

Advance Tabco

Advance Tabco K-23A Sink Or Dish Table Legs Welded To Leg Gussets Under Table Top And To Cross Rails (and Optional Undershelf If Ordered)

Advance Tabco

Advance Tabco FT-3 Modify Trough Depth (2” Minimum To 6” Maximum 4” Is Standard) (sold Per Linear Foot) (must Match Length Of Trough For Odd Lengths Use Next Larger Foot Increment)

John Boos

John Boos X-0413H Mitered Edge Front Corner Of Table Top (modification)

John Boos

John Boos X-00ROS Appalachian Red Oak Sherwood Stain

Advance Tabco

Advance Tabco SU-48R Pair Of Legs Right Side To Support PRT-12 Or PRSJT-12 Where The Unit Cannot Be Attached To Adjoining Equipment. Adds 3” To The Left-to-right Size Of The Trash Area

Advance Tabco

Advance Tabco FC-CB-1-X Special Value Front Cross Brace For FC FS & FE Series Sink (minimum 3 Feet Use Overall Length Of Sink & Subtract Drainboard Length To Get Number Of Feet Required) (Note-to Field Retrofit Existing Sink The Sink Will Need To Have

John Boos

John Boos X-2410RS Size Modification To Reduce Size Price Next Largest Size

John Boos

John Boos X-0002Z Upgrade Modification From John Boos Standard Construction

Advance Tabco

Advance Tabco SG-AN Anodized Aluminum Parts Of Food Shield (specify Color) (not Required For Standard Aluminum Appearance) Typically Applies To The Sleek Shield Adjustment Mechanisms & Usually SG-PC Is Desired As Well For Stainless Parts Of Shield (such

Advance Tabco

Advance Tabco SU-4 Modify Prestige Series Backsplash To 4" Tall (per Linear Foot)

Advance Tabco

Advance Tabco SU-15 Prepare Hot Food Table For Filler Faucet (faucet Not Included) (specify Location Operators Side Left Or Right End) (manifold Drain Option Required To Fill All Wells Select Option -M Or Can Be Supplied By Others) (not Available On U

Advance Tabco

Advance Tabco TA-26-15 Weld Support Brackets To Wall Shelf For 15" Deep Wall Shelves

Advance Tabco

Advance Tabco SU-33 Special Working Height For Underbar Equipment (must Specify Height)

John Boos

John Boos X-0470AC Undershelf 18 Gauge 400 Stainless Steel (per Foot) (3 Foot MINIMUM) (modification)

John Boos

John Boos X-0003LW Wood Top Length Or Width Modification To Reduce Size Price Next Largest Size

Advance Tabco

Advance Tabco TA-26-12 Weld Support Brackets To Wall Shelf For 12" Deep Wall Shelves

FMP

Franklin Machine Products 196-1090 Burner Left